If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
There are no "PWS" tools for this machine. All are onboard.
Switch on the machine.
When the machine is in the ready state, press and hold the # key, then press the Log In/Out key. The Diagnostic Login window will open.
Enter the password (default is 1934). Touch the Enter button on the UI.
NOTE:
Press the C Key to clear an incorrect entry. Three incorrect entries will cause the entry screen to lock for three minutes.
But what if the internal software is malfunctioning?
Do you need to replace some hardware?
Kind regards Artphil
Originally posted by Milo Wilson
There are no "PWS" tools for this machine. All are onboard.
Switch on the machine.
When the machine is in the ready state, press and hold the # key, then press the Log In/Out key. The Diagnostic Login window will open.
Enter the password (default is 1934). Touch the Enter button on the UI.
NOTE:
Press the C Key to clear an incorrect entry. Three incorrect entries will cause the entry screen to lock for three minutes.
But what if the internal software is malfunctioning?
Do you need to replace some hardware?
Kind regards Artphil
1. Open Microsoft Internet Explorer. Enter the machines IP address.
2. Enter the machines IP address. Press return. The CentreWare Internet Services window
will open.
3. Click on the Properties tab.
4. In the Properties window, click on Maintenance, then Firmware Upgrade.
5. Enter the customers username and password. The Firmware Upgrade window will open.
6. In the Firmware Upgrade window, select Browse.
7. Browse to the location of the firmware files. Select the correct firmware file.
8. Select Install Software. The firmware file will now be transmitted to the machine. The
machine will automatically initialize when the upgrade procedure is finished.
9. Check that the machine has been successfully upgraded.
1. Open Microsoft Internet Explorer. Enter the machines IP address.
2. Enter the machines IP address. Press return. The CentreWare Internet Services window
will open.
3. Click on the Properties tab.
4. In the Properties window, click on Maintenance, then Firmware Upgrade.
5. Enter the customers username and password. The Firmware Upgrade window will open.
6. In the Firmware Upgrade window, select Browse.
7. Browse to the location of the firmware files. Select the correct firmware file.
8. Select Install Software. The firmware file will now be transmitted to the machine. The
machine will automatically initialize when the upgrade procedure is finished.
9. Check that the machine has been successfully upgraded.
Comment