If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Xerox f12 similar to wcp 412 no power after drum, fuser and transfer roller change
Xerox f12 similar to wcp 412 no power after drum, fuser and transfer roller change
F12 was working . Replaced fuser, transfer roller and drum unit. When I turned power on no power. No LEDs indicator light or fans. Nothing. 2 fuses on PSB good. Does machine have power supply issues? Any help is appreciated. Frank/ActionPhotocopy
Xerox f12 similar to wcp 412 no power after drum, fuser and transfer roller change
Comment