If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Xerox WC4150, cycles up, panel lights, then goes out, repeat.....
Xerox WC4150, cycles up, panel lights, then goes out, repeat.....
Xerox WC4150, cycles up, panel lights, then goes out, repeat..... the UI panel only ever glows blue , machine whirrs up then down and lights out, over and over and over again>>>> any ideas?
THX
Thats right it has to be done manually i.e remove from machine placed into a 2.5 hdd caddy enclosure and and connected to a laptop/pc and use an application called swissknife which is a free download.
Thanks
The hd's of the machines are really shitty.
Out of 10 machines i had to format/replace 8 hd's
Kid regards,
Artphil
Originally posted by tech9
Thats right it has to be done manually i.e remove from machine placed into a 2.5 hdd caddy enclosure and and connected to a laptop/pc and use an application called swissknife which is a free download.
Thanks
Thats right it has to be done manually i.e remove from machine placed into a 2.5 hdd caddy enclosure and and connected to a laptop/pc and use an application called swissknife which is a free download.
Thanks
And when you reformat, which format do you use (Fat32, EXT4, NTFS etc ??)
Also does anyone know how often the HD is so far gone it has to be replaced?
Thanks.
Comment