Xerox wc pro 128/133 / 5230

[xeroxsharp]

Hello guys.
I am looking for upper fuser roll for this model,because Fuser assy is very-very expensive.
I will appriciate any information.
BR
MITJA
e-mail: mitja.belak@panna.si

[nilak]

check for samsung alternative for whole unit. About at half life of a new upper roller you have to change pressure roll as well.

[nilak]

... or check this one

[xeroxsharp]

Thanks for reply.
I am a tech,I have EDOC,and I am just looking for upper heat roller because the old fuser unit has only 100K and lower roller is OK.
Fuser unit costs more than 370 EUR. This is too much.

[dajver]

I can get you the whole fuser assy brand new for 150e but in Belgrade... Srbija..

[bobplayskeyboards]

Re: Xerox wc pro 128/133 / 5230

Nilak
I'm also struggling with parts for the Xerox 128/133/5230 and so was very interested to read your comment about there being some Samsung equivalents. I have not been able to find which Samsung products are equivalent to the Xerox 128/133/5230. Which ones are they ?

check for samsung alternative for whole unit. About at half life of a new upper roller you have to change pressure roll as well.

[livewire]

Re: Xerox wc pro 128/133 / 5230

Hello everybody,
there is not Samsung equivalent.
Maybe Lexmark X854e is similar.