DC 3535 004-346

[Guest]

Hi All, I have a IOT belt home fault on my C3535, I have cleaned the IBT Assy but still will not do a full belt edge learn test and comes up with the error 30 seconds in. Once this has happened cannot redo the test and need to reboot the machine to do the learn test again,

Any suugestions would be appreciated.

Cheers

Mark

[adriansto]

The silver patch is on the belt ?
Reset nvm 741-056 to 0
Look at the cleaner belt assy
Make sure the cleaner auger rotates free.

[JustManuals]

This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from http://www.justmanuals.com

Paul@justmanuals.com

[sparky1]

Thanks for that much appreciated, also when printing the color pictures appear to be missaligned almost two images not aligned any ideas how to sync it?

[adriansto]

You don't have the manual ?
Make color registration or max setup and after that check registration clutch.

[bojans]

You don't have the manual ?
Make color registration or max setup and after that check registration clutch.

Or call technician!