dc5252 fuser nip

[bojans]

Hi

I'm trying to do fuser nip on dc 5252 but don't understand documentation. This is sample of A4 paper. Could anyone point me do I have to increase or decrease pressure by watching this picture. One roll was teared so I don't want to risk. I was only doing fuser nip on dc12 and there was one line 10.5 mm width, but this is much bigger. Thanks
sample A4 copy-fn.pdf

[ktxerox]

bojan just use first thik line starting from lead edge. it should be 4MM from both edges.

[bojans]

bojan just use first thik line starting from lead edge. it should be 4MM from both edges.