Running DC 5000 on single phase 240

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Milo Wilson
    Trusted Tech

    250+ Posts
    • Feb 2009
    • 499

    #1

    Running DC 5000 on single phase 240

    Can someone lead me to a source to convert 240 single phase power to 240 two phase power to run a DC 5000.
    I have a dc 5000 I'm installing in Bangladesh and they run on single phase 240 and the machine is two phase 240.
    Last edited by Milo Wilson; 07-30-2011, 01:08 AM.
  • seansbar
    Trusted Tech

    Site Contributor
    100+ Posts
    • Dec 2010
    • 198

    #2
    Re: Running DC 5000 on single phase 240

    There really is not a double phase. Here in the USA, its Single phase or Three Phase. There is a capture from the CED. Single phase everywere.DC5000.JPG

    Comment

    • davidj7
      Service Manager

      Site Contributor
      1,000+ Posts
      • Jan 2009
      • 1107

      #3
      Re: Running DC 5000 on single phase 240

      milo: i assume you have come to a solution
      a machine is only as good as your tech : source:screwtape ; the scary one

      Comment

      • Milo Wilson
        Trusted Tech

        250+ Posts
        • Feb 2009
        • 499

        #4
        Re: Running DC 5000 on single phase 240

        Yes Davidj. Thanks anyway. I found that the 5000 will run on 240v "single" phase. Just make sure you tap the incoming power supply to the correct level. As a side note...make sure that you also adjust the UI dell PC to 230 before you let someone power it on...lol

        Comment

        Working...