dc 5252 fuser belt compatibility

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bojans
    Service Manager

    Site Contributor
    1,000+ Posts
    • Feb 2008
    • 1313
    #1

    dc 5252 fuser belt compatibility

    Hi,
    I have dc 5252 with torn Fuser Belt (PN 64K1750 - brown).
    Intend to buy Fuser Belt 64K91311 - black.

    Are there some modifications or I can put this new FB on old assy? Does it fit?
    Thanks
    Tags: 252, 311, 5252, 750, assy, belt, black, compatibility, fuser, torn
    • azehnali
      Senior Tech

      500+ Posts
      • Nov 2009
      • 679
      #2
      Re: dc 5252 fuser belt compatibility

      all the same

        Comment

        • bojans
          Service Manager

          Site Contributor
          1,000+ Posts
          • Feb 2008
          • 1313
          #3
          Re: dc 5252 fuser belt compatibility

          Thanks Alen

            Comment

            • davidj7
              Service Manager

              Site Contributor
              1,000+ Posts
              • Jan 2009
              • 1107
              #4
              Re: dc 5252 fuser belt compatibility

              xerox recommends a NVM change . when switching the belts . I didn't find any difference either way.
              a machine is only as good as your tech : source:screwtape ; the scary one

                Comment

                • bojans
                  Service Manager

                  Site Contributor
                  1,000+ Posts
                  • Feb 2008
                  • 1313
                  #5
                  Re: dc 5252 fuser belt compatibility

                  Thank you for the info.

                  Could you send me these changes?

                  regards

                    Comment

                    Previous template Next
                    Working...