Color problem whith DC 250

[ferranmll]

Hello I've a Docucolor 250 that no print a little area in yellow. I print test pattern 12(see att. files). I change the drum, change de IBT belt assembly for 1rst BTR Bias damage, the result is the same in the both IBT. I change de developer in the developer housing. Can you help me?
Thanks.DC_250655.pdfDC_250656.pdf

[bojans]

Re: Color problem whith DC 250

First i would clean laser.

[xcopytech]

Re: Color problem whith DC 250

yes, clean yellow and cyan laser.

[ferranmll]

Re: Color problem whith DC 250

Sorry, I do this first.

[bojans]

Did you try to swap laser units?

[ferranmll]

Re: Color problem whith DC 250

I didn't. I will try tomorrow. Thanks.

[xcopytech]

Re: Color problem whith DC 250

you must remove miror for yellow and cyan color in laser assembly to clean it.

[JustManuals]

Re: Color problem whith DC 250

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com