WCP 232

[Guest]

My Workcentre Pro 232 is having network controller issues. Status code is 03-544 (Network controller unavailable). At any rate I can't troubleshoot the machine any further without the diagnostics software which has proven quite difficult to find.

Can someone please help me? Thanks in advance.

jb

[xeroxsharp]

Re: WCP 232

My Workcentre Pro 232 is having network controller issues. Status code is 03-544 (Network controller unavailable). At any rate I can't troubleshoot the machine any further without the diagnostics software which has proven quite difficult to find.

Can someone please help me? Thanks in advance.

jb

ALTBOOT is nedeed.

[ZeusGT]

Re: WCP 232

I've got the same problem with one of my C232's. How do you run the ALTBOOT? What else do you need with that? Also, what are the black floppy disks that come with these machines? Thanks

[xeroxsharp]

Re: WCP 232

I've got the same problem with one of my C232's. How do you run the ALTBOOT? What else do you need with that? Also, what are the black floppy disks that come with these machines? Thanks

NETWORK CONTROLER PROBLEMS
You need XEROX PWS / PWS CC32-WCP275F diagnostic tool or authorised XEROX serviceman
Alternate boot is a special boot method for NETW. CONTROLER upgrade
You need a serial and cross-ower cable to upgrade NC,and NC - SW version
Without XEROX PWS you will not be able to upgrade NC.

If HDD in NC is not good,altboot does not help.

Floopy contains NVM setinngs for your wc232

Hope this will help!

BR