WCP 232

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • xeroxsharp
    replied
    Re: WCP 232

    Originally posted by ZeusGT
    I've got the same problem with one of my C232's. How do you run the ALTBOOT? What else do you need with that? Also, what are the black floppy disks that come with these machines? Thanks

    NETWORK CONTROLER PROBLEMS
    You need XEROX PWS / PWS CC32-WCP275F diagnostic tool or authorised XEROX serviceman
    Alternate boot is a special boot method for NETW. CONTROLER upgrade
    You need a serial and cross-ower cable to upgrade NC,and NC - SW version
    Without XEROX PWS you will not be able to upgrade NC.

    If HDD in NC is not good,altboot does not help.

    Floopy contains NVM setinngs for your wc232

    Hope this will help!

    BR

    Leave a comment:


  • ZeusGT
    replied
    Re: WCP 232

    I've got the same problem with one of my C232's. How do you run the ALTBOOT? What else do you need with that? Also, what are the black floppy disks that come with these machines? Thanks

    Leave a comment:


  • xeroxsharp
    replied
    Re: WCP 232

    Originally posted by jbenedetto
    My Workcentre Pro 232 is having network controller issues. Status code is 03-544 (Network controller unavailable). At any rate I can't troubleshoot the machine any further without the diagnostics software which has proven quite difficult to find.

    Can someone please help me? Thanks in advance.

    jb

    ALTBOOT is nedeed.

    Leave a comment:


  • jbenedetto
    started a topic WCP 232

    WCP 232

    My Workcentre Pro 232 is having network controller issues. Status code is 03-544 (Network controller unavailable). At any rate I can't troubleshoot the machine any further without the diagnostics software which has proven quite difficult to find.

    Can someone please help me? Thanks in advance.

    jb
Working...