WC PRO 255 DOC.FEED HELP

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jper34
    Trusted Tech

    Site Contributor
    100+ Posts
    • Sep 2011
    • 225

    WC PRO 255 DOC.FEED HELP

    Hi folks,
    Im working on this WC Pro 255,thats telling me to lift feeder and lower flap to remove paper.Of course,theres no papaer,I did however,remove a staple that was stuck in there,still jam coe 05-538, and 05-522. I cleaned the photo-interrupter and made sure sensor arm springs back o.k. can anyone help me w/ part number for this sensor,and has anyone seen this sensor go bad?
    thanks in advance
    Jaime
    Independent Copier
  • adriansto
    Service Manager

    Site Contributor
    VIP Subscriber
    1,000+ Posts
    • Nov 2007
    • 2308

    #2
    Re: WC PRO 255 DOC.FEED HELP




    Did you use the correct feeder roller cru for this dadf ?

    Comment

    • jper34
      Trusted Tech

      Site Contributor
      100+ Posts
      • Sep 2011
      • 225

      #3
      Re: WC PRO 255 DOC.FEED HELP

      Originally posted by adriansto
      [ATTACH]15914[/ATTACH]


      Did you use the correct feeder roller cru for this dadf ?
      I did replace the pick-up separation assem., is that what mean by cru?
      and it that was maybe 2 weeks past now..? what am I missing?

      Comment

      • adriansto
        Service Manager

        Site Contributor
        VIP Subscriber
        1,000+ Posts
        • Nov 2007
        • 2308

        #4
        Re: WC PRO 255 DOC.FEED HELP

        Originally posted by jper34
        I did replace the pick-up separation assem., is that what mean by cru?
        and it that was maybe 2 weeks past now..? what am I missing?
        Yes pick-up separation assy = cru. There are cru for wc535, wcp55 machine and another cru for wcp2xx series machine. What code is marked on your cru ?

        Comment

        • jper34
          Trusted Tech

          Site Contributor
          100+ Posts
          • Sep 2011
          • 225

          #5
          Re: WC PRO 255 DOC.FEED HELP

          Originally posted by adriansto
          Yes pick-up separation assy = cru. There are cru for wc535, wcp55 machine and another cru for wcp2xx series machine. What code is marked on your cru ?
          i used part# 113686
          workcenter pro 255 is the model

          Comment

          • jper34
            Trusted Tech

            Site Contributor
            100+ Posts
            • Sep 2011
            • 225

            #6
            Re: WC PRO 255 DOC.FEED HELP

            113r686

            Comment

            • adriansto
              Service Manager

              Site Contributor
              VIP Subscriber
              1,000+ Posts
              • Nov 2007
              • 2308

              #7
              Re: WC PRO 255 DOC.FEED HELP

              Originally posted by jper34
              113r686
              Yes this is the partnumber.
              The sensor from attached pdf file is you looking for ?

              Comment

              • xeroxsharp
                Trusted Tech

                250+ Posts
                • Nov 2008
                • 270

                #8
                Re: WC PRO 255 DOC.FEED HELP

                Originally posted by jper34
                Hi folks,
                Im working on this WC Pro 255,thats telling me to lift feeder and lower flap to remove paper.Of course,theres no papaer,I did however,remove a staple that was stuck in there,still jam coe 05-538, and 05-522. I cleaned the photo-interrupter and made sure sensor arm springs back o.k. can anyone help me w/ part number for this sensor,and has anyone seen this sensor go bad?
                thanks in advance
                Jaime
                Independent Copier


                item 11,12


                Item Part No. Description
                1 - Hinge (P/O PL 5.20 Item 16)
                2 - Bushing (P/O PL 5.20 Item 16)
                3 022E25061 CVT/Takeaway idler
                4 806E19680 Shaft
                5 - Torsion spring (green) (P/O PL 5.20 Item 17)
                6 - Base (P/O PL 5.20 Item 17)
                7 - Spring (P/O PL 5.20 Item 17)
                8 - Torsion spring (silver) (P/O PL 5.20 Item 17)
                9 029E37810 Latch pin
                10 - Spring plate (P/O PL 5.20 Item 17)
                11 130K73960 Takeaway sensor (Q05-335) ( REP 5.8)
                12 130K73970 CVT Sensor (Q05-350) ( REP 5.8)
                13 - Sensor support (P/O PL 5.20 Item 17)
                14 - Shaft securing bracket (P/O PL 5.20 Item 17)
                15 - Top cover (P/O PL 5.20 Item 16)
                16 802K93770 Top cover assembly (RoHS) (W/ TAG D-050)
                802K62060 (Non-RoHS) (W/O TAG D-050) ( REP 5.1)
                17 055K36650 Top access cover assembly (RoHS) (W/ TAG D-050)
                055K33563 (Non-RoHS) (

                Comment

                Working...