Phaser 7500 "accumulator belt home position took too long" message

[axyun]

Have done only a few calls on this series. I am doing this call Monday and I would guess most likely problem is either accumulator belt patch, home position sensor or belt motor. Also is this more likely to occur as waste cartridge is close to full. Any help is very much appreciated. Frank/ActionPhotocopy

[Flash]

Re: Phaser 7500 "accumulator belt home position took too long" message

It is most likely a dirty patch on the transfer belt or the patch is coming off. I had to replace a belt for that a couple of weeks ago.

[axyun]

Re: Phaser 7500 "accumulator belt home position took too long" message

Thank you Flash. Frank

[JustManuals]

Re: Phaser 7500 "accumulator belt home position took too long" message

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[axyun]

Re: Phaser 7500 "accumulator belt home position took too long" message

Removed IBT Belt and cleaned silver patch and home position sensor. Cleaned blade on belt cleaner uni. Machine working again. Frank