[Error Code] Xerox 2636 error 09-456

[Tinochka]

Hello.
Xerox 2636 doesn't start up.
Does anybody faced this problem?

UI says 20121003_182528.jpg


and WCP Diagnostic says

[Tinochka]

Re: Xerox 2636 error 09-456

I've heard the cause could be the battery (m4t28-br12sh1) on CCM.
Does anybody know how to change the battery. It should be special procedure?

[bojans]

Re: Xerox 2636 error 09-456

Just replace old battery with a new one. There is procedure to setup machine BIOS. This is for your second error code 3-338.
For error 9-456 check HFSI and reset counters.

[CopierTechofOmens]

Re: Xerox 2636 error 09-456

09-456 is DV end of life.

Also might want to upgrade software. Reseat all PWB's, cables and memory in the ESS.

[Tinochka]

Re: Xerox 2636 error 09-456

The battery has 2.7V. So I think, first I should change the battery, and then I will see.

[bojans]

It's good voltage.

[bojans]

Re: Xerox 2636 error 09-456

Check this

http://www.copytechnet.com/forums/xerox/33762-workcentre-pro-c3545-help-plz.html

Follow procedure posted by adeyemi

[Tinochka]

Re: Xerox 2636 error 09-456

Ok.
I'll try.
thank you very much!

[bojans]

Re: Xerox 2636 error 09-456

You're welcome and good luck

[Tinochka]

Re: Xerox 2636 error 09-456

After I changed the battery, the WCP Diagnostic doesn't connect.

[Tinochka]

Re: Xerox 2636 error 09-456

After restore all NVM dc361 many times and replace the battery - c2636 finally works ok!