[Error Code] DC2240 006-383

[Tinochka]

Hello everybody.
I have a Xerox DC2240 with error 006-383. It starts up ok. But when I try to print or make a copy the 006-383 error message is displayed.
From diagnostic I try to start ros motor (dc330 006-031) it operates. Anybody faced the same problem or can look at the Eureka ?

[johnner66]

Re: DC2240 006-383

that is cause by the laser unit try on the connector that the pin on laser unit is ok then connect again and try g/l

[Tinochka]

Re: DC2240 006-383

that is cause by the laser unit try on the connector that the pin on laser unit is ok then connect again and try g/l

What does that means

try g/l

?

[bojans]

Re: DC2240 006-383

Check out connector/wires from laser unit!

[Tinochka]

Re: DC2240 006-383

ok thank you

[Tinochka]

Re: DC2240 006-383

Today I replaced the Ros assy from another printer, and the error disappeared. So the cause is in the Ros. Does anybody have an experience to fix the Ros?
Many thanks