DC1632 unknown problem

[Tinochka]

Re: DC1632 unknown problem

how about the exposure lamp is this light and is this move 2 time then go to home if no then is the ccd problem good luck

Yes It moves. Service manual says, after 3d dot gets white I can connect with PWS. But I can't. There is something wrong with boot. When I'm at the customer office and try something, I will report here. Just in case it will be helpful for somebody.

[omkalse]

Re: DC1632 unknown problem

Check cable connected to pws.

[Tinochka]

Re: DC1632 unknown problem

Check cable connected to pws.

Cable works fine.