7345 Jams at output. No drive to output exit rolls above the Fuser

[MRCOPY]

Re: 7345 Jams at output. No drive to output exit rolls above the Fuser

No problem, HAVE A GREAT DAY!

Re: 7345 Jams at output. No drive to output exit rolls above the Fuser

Fixed it!!
Thanks!!

[MRCOPY]

Re: 7345 Jams at output. No drive to output exit rolls above the Fuser

There is small white support tab on the outboard edge of output roller that breaks and allows roller to drop out of position.


Hope that Helps,

[RiverRat]

7345 paper makes it to the top output exit rolls but there is no drive. Does this run off of the inverter drive.
Would anybody have the DC 131 location to run the main drive motor assembly? Any suggestions please??