Xerox Phaser 3600 ADC Error on display

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • TechGeek
    Trusted Tech

    100+ Posts
    • Jan 2009
    • 158
    #1

    Xerox Phaser 3600 ADC Error on display

    Hey any of you copier guys,

    I have a Xerox Phaser 3600 with an ADC Not Confirm Error on display. I cant find anything in the service manual on this error only they user guide which only says "ADC Not Confirm Error" There is a problem in the ADC (Analog to Digital Converter) of your machine. Any suggestions?

    I originality posted this thread on the printer forum but have not heard any responses yet so i thought i'd give it a shoot here.
    Tags: 3600, adc, phaser 3600, xerox 3600
    • adriansto
      Service Manager

      Site Contributor
      VIP Subscriber
      1,000+ Posts
      • Nov 2007
      • 2377
      #2
      Re: Xerox Phaser 3600 ADC Error on display

      Most of the time this error is caused by a defect fuser assy.
      If after replacing the fuser the error is still there the next step is to replace main board and lvps but already too expensive.

        Comment

        • TechGeek
          Trusted Tech

          100+ Posts
          • Jan 2009
          • 158
          #3
          Re: Xerox Phaser 3600 ADC Error on display

          Thanks for the suggestion I had not clue were to even start with this one. After your suggestion of the fuser I took it apart and found that one of the two thermistors had a build up of gunk possibly causing the a inaccurate reading between the two thermistors. So far everything has been working fine.

            Comment

            Previous template Next
            Working...