Hi guys,
I having a problem with this xerox 450/550i, it always jam at area 077-109 / 077-103.
I had replaced exit sensor; fuser unit and inverter. Well, jam doesn't happen quite often but become intermittent.
I discovered a strange paper path operation when printing double sided or paper exit from side output tray, it will come out from center lower output and stop there. It suppose to go up direct to center output upper (for duplex) and reverse back or straight up to sided output tray (single sided -side tray).
Anyone has this problem before? Can advice me what to do??
I having a problem with this xerox 450/550i, it always jam at area 077-109 / 077-103.
I had replaced exit sensor; fuser unit and inverter. Well, jam doesn't happen quite often but become intermittent.
I discovered a strange paper path operation when printing double sided or paper exit from side output tray, it will come out from center lower output and stop there. It suppose to go up direct to center output upper (for duplex) and reverse back or straight up to sided output tray (single sided -side tray).
Anyone has this problem before? Can advice me what to do??
Comment