[CQ] Xerox M35

[icb]

Got urgent problem with one M35. Copy from platen glass is fine, but from ADF is dark (black background). I have cleaned optics, changed complete scanner as well as Image Processor PWB, problem persists. Print is perfectly fine.

Any ideas what could be the problem ?

Software is upgraded as well.

Thanks.

[xcopytech]

Re: Xerox M35

try to adjust nvm 14-012.
try add 10 to current value

[icb]

Tried it, no visible changes whatsoever. However, its problem with scanner, the one I tried was also faulty as well.

[xcopytech]

Re: Xerox M35

I presume that you clean all mirrors and scanner lamp.

[adriansto]

Re: Xerox M35

Got urgent problem with one M35. Copy from platen glass is fine, but from ADF is dark (black background). I have cleaned optics, changed complete scanner as well as Image Processor PWB, problem persists. Print is perfectly fine.

Any ideas what could be the problem ?

Software is upgraded as well.

Thanks.

It's a problem with CCD PWB from scanner. This board is faulty. If you are lucky men you'll find a rezistor burnt in the corner of the ccd pwb. If not you need to change the scanner or ( hard work ) the ccd pwb.

[icb]

Re: Xerox M35

It's a problem with CCD PWB from scanner. This board is faulty. If you are lucky men you'll find a rezistor burnt in the corner of the ccd pwb. If not you need to change the scanner or ( hard work ) the ccd pwb.

Yes, I thought it might be the problem. I tried another complete scanner, but apparently CCD PWB on that one was faulty too.

I ordered a new scanner and waiting for it. Thanks for everyones help.