Can someone help.
After replacement of the 2nd BTR assembly, nearly all prints come out with white bands across the page (poor transfer).
I put back the old 2nd BTR assembly (800K done) & prints are OK.
I try another new 2nd BTR assembly & get same problem (poor transfer).
Is there any adjustment that must be done?
Rgds
JP
After replacement of the 2nd BTR assembly, nearly all prints come out with white bands across the page (poor transfer).
I put back the old 2nd BTR assembly (800K done) & prints are OK.
I try another new 2nd BTR assembly & get same problem (poor transfer).
Is there any adjustment that must be done?
Rgds
JP