Xerox Phaser 7800 Fuser Temperature

[Oscar57]

Hi,

Does anyone know if there is a adjustment for Fuser temperature on the Xerox Phaser 7800. I am having a issue with toner sticking to the paper. If I run a much heavier paper stock setting the toner sticks fine but slows the copier way down.

[Tek_services]

Re: Xerox Phaser 7800 Fuser Temperature

No error code????

[Tek_services]

Re: Xerox Phaser 7800 Fuser Temperature

enter DC330 CODE 10-100 TO HEAT THE FUSER

[Iowatech]

Re: Xerox Phaser 7800 Fuser Temperature

Hi,

Does anyone know if there is a adjustment for Fuser temperature on the Xerox Phaser 7800. I am having a issue with toner sticking to the paper. If I run a much heavier paper stock setting the toner sticks fine but slows the copier way down.

It takes more time to properly fuse toner to heavier paper. The slow down is normal machine operation.

[Exok]

Re: Xerox Phaser 7800 Fuser Temperature

What kind of paper are you using that you have having the trouble with?

[MonsterBaby]

Re: Xerox Phaser 7800 Fuser Temperature

know what u are talkin about. im having the same problem!
talked to some techs and had no resolution for it!.. did u find a way to solve the problem?

do you use the original toner?