[Misc] Xerox 7835 ..."Reset Device"

[Guest]

This 7835 won't reset, It will NOT see a thumb-drive installed for a Alt-boot, Tried new SBC and fuser, it just says "Reset Device" after about 6 min. or so , Anybody seen this?

[Flash]

Re: Xerox 7835 ..."Reset Device"

Try initializing NVMs. It should take a forced altboot That usually gets it back up and then you can use the self cloning feature to restore network settings

[Jhill2]

Re: Xerox 7835 ..."Reset Device"

Try initializing NVMs. It should take a forced altboot That usually gets it back up and then you can use the self cloning feature to restore network settings

It can't get that far, I have No access to NVM and won't acknowledge a USB device when plugged in. Most info. points to the SD card when this happens I've just found out, Thanks for the info anyway.

[Exok]

Re: Xerox 7835 ..."Reset Device"

Have you tried the USB port on the SBC for an AltBoot? The front port may not be active.