xerox 700 connectivity problem

[aparat]

HI, i have a problem with my xerox 700 - think something with connection (busteled fiery)
I CAN print normaly from command workstation and from driver, works OK.
BUT
I can not connect to the fiery server via IP. I can not acces "server configuration" via CWS, and i cant acces web applications via UI.
Allso the communication when i print with driver seems slow.
What could it be?

[adriansto]

Reinstall Fiery software.
It's the quickly method.

[InterfaceP]

Re: xerox 700 connectivity problem

Make sure you have a crossover cable connected from the scan port on the Fiery to the net port on the 700.

[aparat]

Re: xerox 700 connectivity problem

Make sure you have a crossover cable connected from the scan port on the Fiery to the net port on the 700.

hi, cable is ok, network scanning is allso working

[Exok]

Re: xerox 700 connectivity problem

I've seen this problem with a DC252. Even though the crossover cable worked when I tested it, replacing the crossover cable (then reboot) fixed the problem. This customer still has the issue pop up once in a while and they fix it by disconnecting both ends of the crossover cable, power the machine off, reconnect the crossover cable then power back on.