If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
i have a xerox wc5655 copier which is not booting when i switch on it ll came on just 5 dots thats all i have tried to remove the memory then put back the plobrem is the same pliz advice
i have a xerox wc5655 copier which is not booting when i switch on it ll came on just 5 dots thats all i have tried to remove the memory then put back the plobrem is the same pliz advice
Did you try to restore NVM?
It seems that is common problem to this series. I have couple with bad NVM Pwb's, but it could be drained battery. So first try to restore NVM.
There is default nvm file if you dont have floppy disk...
Comment