Fuji xerox wc7245 error code 006-381

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Hong1007
    Technician
    • Nov 2013
    • 41

    #1

    [Error Code] Fuji xerox wc7245 error code 006-381

    Hi all friend,

    I hv 1 machine fuji xerox wc7245 error code 006-381,
    That is a ROS ( laser ) fault. But where area i want to check??

    Thanks
  • Exok
    Senior Tech

    500+ Posts
    • Jun 2011
    • 750

    #2
    Re: Fuji xerox wc7245 error code 006-381

    I don't see that error code in the edoc.

    061 codes are ROS faults. I don't even see a 61-381.

    Comment

    • adriansto
      Service Manager

      Site Contributor
      VIP Subscriber
      1,000+ Posts
      • Nov 2007
      • 2383

      #3
      Re: Fuji xerox wc7245 error code 006-381

      Originally posted by Exok
      I don't see that error code in the edoc.

      061 codes are ROS faults. I don't even see a 61-381.
      Exok, 7245 is from WC73xx machine class not from WC7242

      Check PJ 401 -B20 from MCU pwb/ Must have 5 volts between that pin and machine ground. If not then MCU = defect.
      If ok check the wire between PJ 528, PJ 517 pin 1 from ROS to same PJ 401 from MCU.
      IF ok then change the ROS
      Last edited by adriansto; 11-28-2014, 08:42 PM.

      Comment

      • framza1
        Junior Member
        • Nov 2014
        • 5

        #4
        Re: Fuji xerox wc7245 error code 006-381

        ...

        Comment

        Working...