xerox 252 not printing cyan anymore

[mpsolutions]

Re: xerox 252 not printing cyan anymore

I did the Registration Control-setup cycle as requested. Now the machine is printing out of register again. And still not printing cyan.
Help!!!

[tasosGR]

Re: xerox 252 not printing cyan anymore

Is this done thru PWS (I dont have one), or it can be done thru the touche screen, and How?

1.

[mpsolutions]

Re: xerox 252 not printing cyan anymore

1. Enter the Diagnostic Mode. Refer to Entering PWS Diagnostic mode.
2. Select dC675 from the DC Quick menu.
3. Select Start.

Is this done thru PWS (I dont have one), or it can be done thru the touche screen, and How?

[tasosGR]

Re: xerox 252 not printing cyan anymore

I removed the developer cover and cheated the fornt door, the developer gears seem to run just fine, what else do I need to check.

1. Enter the Diagnostic Mode. Refer to Entering PWS Diagnostic mode.
   
2. Select dC675 from the DC Quick menu.
   
3. Select Start.

[mpsolutions]

Re: xerox 252 not printing cyan anymore

I removed the developer cover and cheated the fornt door, the developer gears seem to run just fine, what else do I need to check.

[tasosGR]

Re: xerox 252 not printing cyan anymore

Hi everyone,
I just changed the MOB sensor on my xerox 252 due to a faulty misregistration problem, and now the machine does not print cyan anymore.
Is this related to the MOB sensor? Registration is perfect now, but I still get all NEG on regisrtation procedures. How is that possible?
Any idea about the problem with the missing cyan.
By the way, I changed IBT belt and put new cyan drum, still same problem.
your Help is very much Appreciated.

Take a look at the cyan housing gears (inboard gear)

[mpsolutions]

Hi everyone,
I just changed the MOB sensor on my xerox 252 due to a faulty misregistration problem, and now the machine does not print cyan anymore.
Is this related to the MOB sensor? Registration is perfect now, but I still get all NEG on regisrtation procedures. How is that possible?
Any idea about the problem with the missing cyan.
By the way, I changed IBT belt and put new cyan drum, still same problem.
your Help is very much Appreciated.