xerox wc 7675 fault code 10-321

[Mukasa]

Hi guys a you ok? my machine has refused to reset the fuser system error.
I reseted NVM 744-530 to 744-352 all to '0' fualt not cleared.
Changed fuser motor, IOT driver, and LVPS. still getting 10-321.
Help me out please.

[InterfaceP]

Re: xerox wc 7675 fault code 10-321

This is a fuser nip sensor fail. Did you replace the fuser?

[Mukasa]

Re: xerox wc 7675 fault code 10-321

This is a fuser nip sensor fail. Did you replace the fuser?

Thanks for the reply, i have changed the all fuser sensor too but still no change.
The machine gets ready to copy /print but when you send a comand to copy /print it starts to rotate to make a copy but the fuser motor fails to rotate at all even in the process of warming up.

[yomba]

Re: xerox wc 7675 fault code 10-321

Check the fuser nip in service mode.
dC330 [010-203]

if that fails your next option would be the mc board

[Mukasa]

Re: xerox wc 7675 fault code 10-321

Check the fuser nip in service mode.
dC330 [010-203]

if that fails your next option would be the mc board

Thanks Guys ,i replaced the MC PWB and the fault cleared machine now ok.