GR 3750 Check Paper feed area

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cokwax
    Technician

    50+ Posts
    • May 2013
    • 50
    #1

    GR 3750 Check Paper feed area

    Faulty Power supply caused a fault on my system PCB. Replaced both. Now getting an error at startup "controllare area presa carta" which I guess means check paper feed are. No paper is jammed, Papers loaded to tray but machine cannot work. Tried test mode 97 in vain. Is this caused by the change of system PCB? Any advice?
    Tags: None
    • filmplane
      Technician

      50+ Posts
      • Nov 2014
      • 84
      #2
      Re: GR 3750 Check Paper feed area

      Originally posted by cokwax
      Faulty Power supply caused a fault on my system PCB. Replaced both. Now getting an error at startup "controllare area presa carta" which I guess means check paper feed are. No paper is jammed, Papers loaded to tray but machine cannot work. Tried test mode 97 in vain. Is this caused by the change of system PCB? Any advice?
      See this post here: it may be the safety bar switch:
      http://www.copytechnet.com/forums/di...tml#post553511

        Comment

        • cokwax
          Technician

          50+ Posts
          • May 2013
          • 50
          #3
          Re: GR 3750 Check Paper feed area

          Originally posted by filmplane
          See this post here: it may be the safety bar switch:
          http://www.copytechnet.com/forums/di...tml#post553511
          Mine seems different issue. Safety bar switch is operating properly,Its switches click when pushed up and click again when released. Even its removal does not help.

            Comment

            Previous template Next
            Working...