[Dead] Risograph EZ201E Just Beeping after firmware update.

[Tommy Chilcott]

Good Day.

After updating a Risograph EZ 201 E with the following firmware "EZ2X1 V1.10_RLLJ4.04". The duplicator keeps beeping. Won't even go into simulation mode. Any advice?

[jermyth]

Re: Risograph EZ201E Just Beeping after firmware update.

Sounds like something went wrong with the download. Check the leds with the error chart in manual pg 16-13. You may need a more recent firmware too.
Good luck.