[Error Code] Riso Rn-2030, system error: T25-026

[Guest]

Hi All,
I replaced the master roll and I have the following error anytime I power on :
" !!System Error!!
Turn Main Power SW OFF Then ON
If Recovery has Failed, Call Services..."

I tried to reset the Riso or starting the Test mode without success.

I was thinking to replace the battery or to update the firmware.

Thank in advance for any help.

All regards.

Sala

[LA TECH]

Replace the battery

[Saladavis]

Thank you for your Help.

I will try to locate the battery and to replace it.

Keep you informed.

[Saladavis]

Hello again Manny (La tech),
I unmount the panel control trying to locate the battery, there is a cylindric component with "black cup". It seems to be the lithium battery...but i am confused, i cant take off the cup very easy and there is a "BZ1" inscription near . may be it's the buzzer and not the battery.

Any help or information to locate the battery are welcome.
Thank you.

All regards.

Sala

[Saladavis]

The battery is located at the back and not under the panel control, i'ts a CR 2450.
I replaced it restart the Riso and it's working again "comme un charme"

Thank you for your help.

Sala

[LA TECH]

Good job I was gonna tell it is in the main board in the back of the machine.

[Saladavis]

Thank you again, you really helped The Literacy center in Falgstaff, Arizona.

Sala