If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
you need to input the value on the machine for the ink color the value is 1-black or 2-color
you need to go into service mode the go to 890 and input what color of ink the drum is weather its black or color and that should get rid of your issue
you need to input the value on the machine for the ink color the value is 1-black or 2-color
you need to go into service mode the go to 890 and input what color of ink the drum is weather its black or color and that should get rid of your issue
is there a list of what all the errors mean and how to enter the appropriate code?
I could be need to set the drums with the code number 890 test mode only team you can do with a genuine ink, the chip of the generic inks tend to unset the drum cards again
Comment