Riso errors

Collapse
X
Collapse
+ More Options
Posts
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • landspeeder
    Trusted Tech

    250+ Posts
    • Feb 2010
    • 355
    #1

    Riso errors

    I have a chance to buy a couple of units one is a:

    RZ220...has a "region 3" error and a

    RZ390 which has a P17..20 error ....

    can somebody tell me what they mean


    Thanks and have agreat one
    You never realize how cheap a professional is until after you let an amateur do it.... and
    if this was an easy thing to do then everybody would be doing it! But it isn't and they are not!!
    Tags: None
    • Iowatech
      Not a service manager

      2,500+ Posts
      • Dec 2009
      • 3930
      #2
      Re: Riso errors

      Not sure about the "Region 3" error, but P17 is that the solenoid counter isn't connected. I'd be kind of suspicious of that one. The counter could just be unplugged, though.

        Comment

        • RRodgers
          Service Manager

          1,000+ Posts
          • Jun 2009
          • 1947
          #3
          Re: Riso errors

          Did it have a Hecon on it at one point?
          Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

            Comment

            • landspeeder
              Trusted Tech

              250+ Posts
              • Feb 2010
              • 355
              #4
              Re: Riso errors

              I think it had a counter but they are about 2hrs from here and we were looking at buying them..... so what has to be done to make these machines normal again?

              Thanks
              You never realize how cheap a professional is until after you let an amateur do it.... and
              if this was an easy thing to do then everybody would be doing it! But it isn't and they are not!!

                Comment

                • 20gaugeO/U
                  Senior Tech

                  500+ Posts
                  • Feb 2009
                  • 553
                  #5
                  Re: Riso errors

                  Released in 2004 so kick the tires and see what falls out. What are the copy/master counts and what type of environments did they come out of? Like buying a used car, you never know what you're going to get.

                    Comment

                    • landspeeder
                      Trusted Tech

                      250+ Posts
                      • Feb 2010
                      • 355
                      #6
                      Re: Riso errors

                      Originally posted by 20gaugeO/U
                      Released in 2004 so kick the tires and see what falls out. What are the copy/master counts and what type of environments did they come out of? Like buying a used car, you never know what you're going to get.

                      My own feeling exactly...we all here agree...
                      You never realize how cheap a professional is until after you let an amateur do it.... and
                      if this was an easy thing to do then everybody would be doing it! But it isn't and they are not!!

                        Comment

                        • 20gaugeO/U
                          Senior Tech

                          500+ Posts
                          • Feb 2009
                          • 553
                          #7
                          Re: Riso errors

                          There were changes made to the 390/590 drums to stop them from flicking ink out the front top. That's probably the only major problem as long as TPH doesn't have lines and all the other regular maintenance parts. But once again you have to see these things to know if they are shot and listen to it run.
                          Good luck

                            Comment

                            Previous template Next
                            Working...