RP3700 Masters not attaching to drums. *A16-525*

[Exok]

Re: RP3700 Masters not attaching to drums. *A16-525*

I don't know this model. Its been many years since i've worked on Riso. Isn't there a sensor calibration that can be preformed so that the master drum detect sensor can tell the difference when there is a master on a drum and when there is none? I know on the Savin duplicators I often had to recalibrate these sensors for this kind of problem.

That would be a more permanent fix for this guy.

[Iowatech]

Re: RP3700 Masters not attaching to drums. *A16-525*

I don't know this model. Its been many years since i've worked on Riso. Isn't there a sensor calibration that can be preformed so that the master drum detect sensor can tell the difference when there is a master on a drum and when there is none? I know on the Savin duplicators I often had to recalibrate these sensors for this kind of problem.

That would be a more permanent fix for this guy.

Nope, there isn't a sensor calibration like that on any Riso equipment that I've ever encountered.

[jermyth]

Re: RP3700 Masters not attaching to drums. *A16-525*

Iowatech, there is one sensor that can be calibrated on a RP, paper width for the PFT. Other than GR units, that had several sensors that could be adjusted or sensitivity adjusted via potentiometer I think that's it.

[Iowatech]

Re: RP3700 Masters not attaching to drums. *A16-525*

Iowatech, there is one sensor that can be calibrated on a RP, paper width for the PFT. Other than GR units, that had several sensors that could be adjusted or sensitivity adjusted via potentiometer I think that's it.

Oops, forgot about that one.
I should have known better, too. I still have the home made width gauges for the RNs and RPs in my tool case.
I need to clean out my tool case.