Brother error room temapruture is to high

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • b1406
    Technician

    50+ Posts
    • May 2008
    • 51
    #1

    [Misc] Brother error room temapruture is to high

    Hello
    I have this Brother MFC 6710 dw
    It gives this message often "room temparuture is to high".
    The printer gives this message once in a 3 or 4 days
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 23009
      #2
      Re: Brother error room temapruture is to high

      Do all the fans operate? Are any of the fans blocked by dust, or installed blowing in the wrong direction? =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • b1406
          Technician

          50+ Posts
          • May 2008
          • 51
          #3
          Re: Brother error room temapruture is to high

          it does not have fan

            Comment

            Previous template Next
            Working...