Re: Brother MFC-L9550cdw How to reset Fuser & Laser Unit counters
I have sent you a private Message with the keystrokes although I'm fairly sure it's easy to find on google.
If you are still struggling PM back or repost here
Brother MFC-L9550cdw How to reset Fuser & Laser Unit counters
Collapse
X
-
Re: Brother MFC-L9550cdw How to reset Fuser & Laser Unit counters
I'm not sure, but is that the hold down the 6 and 2 thing?Leave a comment:
-
Re: Brother MFC-L9550cdw How to reset Fuser & Laser Unit counters
Put the machine into maintenance mode as you would with any Brother product then use maintenance 84 or 88.
If you do not know how to access maintenance mode let me knowLeave a comment:
-
Re: Brother MFC-L9550cdw How to reset Fuser & Laser Unit counters
How do I get into 84 or 88?Leave a comment:
-
Re: Brother MFC-L9550cdw How to reset Fuser & Laser Unit counters
Assuming you are a tech
Maintenance mode try either 84 or 88 for parts life reset.
Usually comes up PF kit first, use arrow to scroll to fuser and laser then o.k then yes or startLeave a comment:
-
Re: Brother MFC-L9550cdw How to reset Fuser & Laser Unit counters
It's All in Service manual, if you need one post a request in proper section I'm sure someone will help with.
What's the point if endusers have sims to reset parts without replace themLeave a comment:
-
Re: Brother MFC-L9550cdw How to reset Fuser & Laser Unit counters
I'm thinking, if I had the manual, I would also have the answer?
Or I would find out that it is not possible to do this reset without replacing the fuser or laser units
I do not have the service manual.
Is it possible to do this reset with pushing the right buttons and if so, what are the right buttons and sequence?
Help pleaseLeave a comment:
-
Re: Brother MFC-L9550cdw How to reset Fuser & Laser Unit counters
do you have the manual? PM meLeave a comment:
-
Brother MFC-L9550cdw How to reset Fuser & Laser Unit counters
I've reset toner counters on this model and drum, transfer counters on other Brother models,
but I cant figure out how to reset the Fuser or Laser unit counters on this model and the reset process
for other models doesn't work on this model MFC-L9550cdw
Help please
Leave a comment: