Faxphone l170 says install cartridge

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • fixthecopier
    ALIEN OVERLORD

    2,500+ Posts
    • Apr 2008
    • 4712
    #1

    Faxphone l170 says install cartridge

    The call was for jamming and when the roller came in, I went back to install and after I did the machine now says Install Cartridge. I can not see anything and do not have a spare cartridge. The sensor is making contact with the bottom of the cartridge. Any ideas would be helpful.
    The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking
    Tags: 395, act, back, bottom, canon, cartridge, config, coupling, drive, drum, engineer, fixthecopier, gear, install, jamming, l170, roller, sensor, side, spring, stall
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16092
      #2
      Originally posted by fixthecopier
      The call was for jamming and when the roller came in, I went back to install and after I did the machine now says Install Cartridge. I can not see anything and do not have a spare cartridge. The sensor is making contact with the bottom of the cartridge. Any ideas would be helpful.

      Check the Drum Drive Coupling inside/remove and look in
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • fixthecopier
          ALIEN OVERLORD

          2,500+ Posts
          • Apr 2008
          • 4712
          #3
          I got it. Another crackhead design. Who is the ass who made us go through that to put a roller on! I had dislodged the spring in the gear pack . Thanks for the reply.
          The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16092
              #4
              Originally posted by fixthecopier
              I got it. Another crackhead design. Who is the ass who made us go through that to put a roller on! I had dislodged the spring in the gear pack . Thanks for the reply.
              thanks,

              this is the a**
              canstock1565703..jpg

              CANON ENGINEER MAN
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                Previous template Next
                Working...