82 results in 0.0162 seconds.
-
M2640dw jamming from tray 1
Copier has less then 10k on it and it jams from tray 1. Feed/separation/p/u rollers look good. The client had knocked the separation roller assembly spring... -
Xerox D95 Dispencer Error 093-311
Hello!
I had a dispencer error 093-311 before. I have replaced broken toner sensor lever spring and the low toner sensor but printer stops again... -
Kyocera 4052, 4053, 4054 MP Tray Wire MPF
I am installing the wire that holds up the MP tray in a TA3253ci. The customer damaged it pretty good and I am unable to find an image on how the plastic... -
4750i incorrect toner/ replace toner
This took me a while to figure out. After taking it completely apart, the TBSB (toner bottle sensor board) was missing the spring according to the parts... -
MX7570 fuser drive unit
Hello, On a 753 and I believe in a 654 the gears of the fuser drive unit that are on the inside of machine,mounted on a swingarm, the swingarm has a spring... -
IMC300 doesn't print black
Hello everyone.
I'm calling for some help on a IM C300 I'm struggling with since 3 days. Here is the story :
- I changed...Last edited by Bourriks; 03-08-2023, 04:03 PM. -
C3350i adf rollers that dont lock in upright position
Anyone else dealing with this?
Replacing the pickup assy is a quick fix, though expensive and it only lasts a few thousand pages before... -
hp m527 mfp spring
Hi There,
We have a hp m527 that had a spring come out of the unit. I can't for the life of me find where it came from. I have looked at... -
TASKalfa2552ci DP Hook spring
Hi, i searched and searched from Part List TASKalfa2552ci Hook spring what comes to DP cover. So do anybody knows part number or how i found it. I attach... -
C-3851, not feeding from paper tray, code 12-01
Hey guys.. I'm figuring out some of the issues with thing, but it seems, inherently, like this is a just a really lousy paper feed (lift) design in these... -
DP-7160 not detected - Taskafa 2554ci
After some difficulty, I finally found the solution. The board of the Dp was short-circuited due to the incorrect positioning of a spring in the sheet... -
Riso RP3700 sector gear spring and paperfeed tray spring got mixed up
I took over from a repair job which was not finished. This involved paperfeed clutch in secondary feed. I have two springs, one of which should go onto... -
Shipping delays, damage
I've been in this "business" for 40 years. I have NEVER seen shipping foul ups as much as I have since last
spring. Machines routed... -
mpc307 paper tray lift bottom plate spring
At the rear side where the bottom lift spring is attached to, at the part of the bottom plate itself (rear).
mpc307 paper tray, bottom lift spring... -
6235 can someone explain how the transfer voltage works
Hi,
I've got a machine with very faint copies. I can't understand the path of the secondary transfer voltage. There's 2 springs one is the...
