Hi, its been awhile since we serviced a Canon NP copier. I have a customer with an NP6545 with an E000 which is usually a fixing unit heater issue, thermistor, fuse or lamp most common. If I remember right, there is usually a reset for the fuser codes for enduser safety. Could someone tell me the reset? If you like it can be thru PM also. Thanks , appreciate it. DnG
-
-
Thats easy........poke a clip thru small hole inside front door-------$ sign comes up on display. Now you can enter service mode. You need *4* then go thru screens to "error" & reset it. Good Luck--------------BlazesigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com -
Blaze,
Thanks, appreciate the quick response, gonna go there myself.
DnGComment
-
no problem-------glad to helpsigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.comComment
Comment