HP LJ4250 fuser

[tufbnme]

I am sick to death of fuser issues with the 4250. There are so many different types (reman, refurbed, new compatible and new) I have tried all and they just don't go the distance.
Can someone please refer where I can get good, new OEM fusers?
Thanks

[JR2ALTA]

Re: HP LJ4250 fuser

LPT Home Page - HP LaserJet and Lexmark Parts

great tech support as well

[tufbnme]

Re: HP LJ4250 fuser

Thanks I'll give them a try.

[fixthecopier]

Re: HP LJ4250 fuser

LPT Home Page - HP LaserJet and Lexmark Parts

great tech support as well

I was going to say the same thing.

[Iowatech]

Re: HP LJ4250 fuser

I am sick to death of fuser issues with the 4250. There are so many different types (reman, refurbed, new compatible and new) I have tried all and they just don't go the distance.
Can someone please refer where I can get good, new OEM fusers?
Thanks

You should get the maintenance kit. Turns out you generally save money if you do that rather than just get the fuser.
Theoretically, you should still be able to get that from HP. And you'll most likely build up your feed roller reserves that way too.

[subaro]

Re: HP LJ4250 fuser

When replacing the fuser unit, i would also replace the black gear on the swing plate assy or the entire swing plate if the white gear is almost gone. The black gear is easy enough to replace with the fuser unit. Also lube the swing plate assy gears with grease containing PTFE.