Laserjet 4000TN dissassembly question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nathicana
    Trusted Tech

    Site Contributor
    250+ Posts
    • Aug 2008
    • 329

    #1

    [Jamming] Laserjet 4000TN dissassembly question

    I broke a guide on uppermost drawer assembly of an HP Laserjet 4000TN when forcing a stuck drawer open.

    Now I am having difficulty finding the best way to replace it.

    I included a diagram showing the part. Does anyone know how this section comes apart ?
    Attached Files
  • Wild Bill
    Senior Tech

    500+ Posts
    • Jul 2005
    • 774

    #2
    Re: Laserjet 4000TN dissassembly question

    All of the steps are in the service guide . Looking at the diagram you have the manual.
    Izzy

    Comment

    • nathicana
      Trusted Tech

      Site Contributor
      250+ Posts
      • Aug 2008
      • 329

      #3
      Re: Laserjet 4000TN dissassembly question

      Originally posted by Wild Bill
      All of the steps are in the service guide . Looking at the diagram you have the manual.
      Does that mean separating the printer from the cassettes and removing the top plate of the cassette? I looked for the procedure to replace the specific part and didn't find. I will look again

      Comment

      • Lance15
        Service Manager

        Site Contributor
        1,000+ Posts
        • Jun 2015
        • 1083

        #4
        Re: Laserjet 4000TN dissassembly question

        Yes, you will need to separate the engine from the drawer. Simple to do.

        Then start taking the drawer apart. There are no instructions on doing this. You just have to go off what you see. It isn't really bad.

        Comment

        • nathicana
          Trusted Tech

          Site Contributor
          250+ Posts
          • Aug 2008
          • 329

          #5
          Re: Laserjet 4000TN dissassembly question

          Originally posted by Lance15
          Yes, you will need to separate the engine from the drawer. Simple to do.

          Then start taking the drawer apart. There are no instructions on doing this. You just have to go off what you see. It isn't really bad.
          Lance, thank you.

          Comment

          Working...