I am getting a B3776F06 Error on the screen and i can not find that anywhere. Its not in the manual. Please help me figure out what this error is. Thank you.
-
-
Re: B3776F06 blue Screen and T520 will not boot up
To resolve blue or blank screen errors:
- Turn the printer off, then on again.
- If possible, perform a Hard Reset from the Support Menu. The Support Menu for the customers is accessible from the error screen by pressing the Power Button continuously for 15 seconds.
- Scroll down to Resets, and then Hard Reset.
- When prompted, enter the password 3746 to initiate the hard reset.
- Turn the printer off, then on again. Verify that the issue is resolved.
- Install the most recent firmware upgrade.
- If the issue persists, replace the Main PCA.
- Turn the printer off, then on again.
Comment