[Jamming] Pro 400 Color M451nw

[Arkynsaw]

Jams at exit , consistently , about 2.25 inches out of exit rollers . Sensors seemed to test fine . Replaced the fuser unit which has the 2 exit sensors , still doing the same thing . All settings seem to be correct . Only about 7 K on machine . I have all related manuals . Has anyone seen and resolved this problem ?
Thanks in advance , Ark .

[theengel]

Re: Pro 400 Color M451nw

Do those machines have a error history? I'd be interested to know about the jam code. And if it does it from all the paper drawers.