HP M525 Close top feeder cover

[theengel]

Re: HP M525 Close top feeder cover

How do you know it's black that is fine? LOL

You're probably using generic ctgs. Those cause the colors to be off.

[tech28]

Re: HP M525 Close top feeder cover

Replaced all the covers on the 575, then it threw a 30.30 error, document feed sensor, done with it! We replaced the feeder. Live and learn. The M575, has oem toners and still registration off. Black is dead on, colors are just off.

[tech28]

Re: HP M525 Close top feeder cover

Ment to say M 525 feeder .

[theengel]

Re: HP M525 Close top feeder cover

If you have oem toners, and the registration is still off, do a cold reset. If that doesn't work (it probably won't), replace the transfer belt assembly.

[tech28]

Re: HP M525 Close top feeder cover

Did reset, new firmware, great registration now! Great prints, Thanks Theengel!!

[theengel]

Re: HP M525 Close top feeder cover

I would have sworn that wouldn't work in this case--but it did work a couple of times for me on other machines. Hmmm. Good deal.

[Wild Bill]

Re: HP M525 Close top feeder cover

You say you had a 59.05.50 error back in this thread on a m525. Did you discover the problem? Installed paper feed solenoid and now I'm getting that error...

Retraced my steps, connectors, now I'm at a loss. I tried component test and no main motor. FUSER and scanner, solenoid all working.

[tech28]

Re: HP M525 Close top feeder cover

Yes I did, after all the time and headaches, I just replaced the whole darn feeder and it worked great! Can get those rather cheap now from wholesaler, 50 or so, then you have a couple of parts machines(fusers and formatters and all. Really wanted to get to the bottom of it, why the code? Guess won't find out, take the 10-15 minutes and just replace the feeder and be done with it, march on to other battles!