HP: Justifying Color misregistered Issues

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Orgfix
    Junior Member
    • Jun 2017
    • 3

    [Misc] HP: Justifying Color misregistered Issues

    Hello.
    I want to discuss the old and dusty topic - "HP color alignment."
    The purpose of the post (its further discussion) is to close this topic, at least partially.
    Here goes.


    1. Terminology.
    The defect is googled by the words: misregistered (in SM); align, misaligned, offset, ghost (on specialized forums and "on your Internet").


    2. The essence of the problem. It's here:

    a2baebc5fee8.jpg
  • tech28
    Trusted Tech

    Site Contributor
    250+ Posts
    • Jun 2013
    • 434

    #2
    Re: HP: Justifying Color misregistered Issues

    Just ran into that problem, new formatter, did the cold reset, new firmware. oem toners, IT WAS THE TRANSFER BELT! My post is in here, in the history for HP's. Good Luck.

    Comment

    Working...