Anyone successfully clone a Designjet hard drive?

[wav]

Re: Anyone successfully clone a Designjet hard drive?

Hi,

update - i have now got a clone for a hp DesignJet t930/t1530- new hdd p/n L2Y21-67004

[eberak]

Re: Anyone successfully clone a Designjet hard drive?

Hello! Sorry for reviving an old thread but i have a Designjet T975 with a hard drive making sounds and giving me 08.11 error. Does anyone have an image for this?

Edit: After hooking up the drive to a pc for cloning attempts its asking for a password as you guys have mentioned already, but where can i find one for that model?

[wav]

Re: Anyone successfully clone a Designjet hard drive?

hi -

can any one help with a hdd clone of a t1700

[erquaglia]

Re: Anyone successfully clone a Designjet hard drive?

Had a HDD failure on a T770 today. Looking for an image to burn on a new disk if anyone has it,
otherwise I'll begin attempting an 1:1 sector clone using an ICY BOX.

Thank god this forum exists by the way

Please I need an image for it as well, did you manage to find one?

otherwise does anyone else got one?

thank you so much guys

[DPSolutions]

Re: Anyone successfully clone a Designjet hard drive?

Hi,

update - i have now got a clone for a hp DesignJet t930/t1530- new hdd p/n L2Y21-67004

Hi, do you also have a clone for hp DesignJet T930 p\n: L2Y22-67004?

[wav]

Re: Anyone successfully clone a Designjet hard drive?

Hi, do you also have a clone for hp DesignJet T930 p\n: L2Y22-67004?

hi there the name model- yes its a direct copy of the new hdd .

pm me.

its a large file.

[DPSolutions]

Re: Anyone successfully clone a Designjet hard drive?

hi there the name model- yes its a direct copy of the new hdd .

pm me.

its a large file.

I tried to write to you privately but it gives me this error...
"wav has exceeded their stored private messages quota and cannot accept further messages until they clear some space."

[Thekidz]

Re: Anyone successfully clone a Designjet hard drive?

Hi All

This is a very informative thread. Than you for keeping these old horses alive. I have a designjet 1055cm plus I am trying to resurrect. I replaced the drive years ago and forgot how I did it. The drive appears to be working but I wanted to clone it just in case of failure. It has been about 8 years. I am having trouble trying to burn an image but am still trying. Does anyone have any tips for cloning? I am using an ide to usb adapter in clonezilla but I am having issues with copying an image of to a file. I only have 1 ide adapter so I can't try disk to disk. Even better, would someone have an image from a 1050 / 1055 hard drive? Any help would be greatly appreciated. Keep up the good work.

Thanx
Craig

[slimslob]

Re: Anyone successfully clone a Designjet hard drive?

Hi All

This is a very informative thread. Than you for keeping these old horses alive. I have a designjet 1055cm plus I am trying to resurrect. I replaced the drive years ago and forgot how I did it. The drive appears to be working but I wanted to clone it just in case of failure. It has been about 8 years. I am having trouble trying to burn an image but am still trying. Does anyone have any tips for cloning? I am using an ide to usb adapter in clonezilla but I am having issues with copying an image of to a file. I only have 1 ide adapter so I can't try disk to disk. Even better, would someone have an image from a 1050 / 1055 hard drive? Any help would be greatly appreciated. Keep up the good work.

Thanx
Craig

It is a very old method but if you can get a utility that can do absolute sector copying it is possible. I used to use Norton Utilities under DOS.

[Thekidz]

Re: Anyone successfully clone a Designjet hard drive?

It is a very old method but if you can get a utility that can do absolute sector copying it is possible. I used to use Norton Utilities under DOS.

Hi and thanx. I don't have a pc old enough to have an ide interface. I don't think dos had usb drivers back then. I have a second usb adapter coming to try direct disk to disk with clonezilla. I may try searching out an old pc. Thanx for the suggestion. I will keep trying.

[Libus]

Re: Anyone successfully clone a Designjet hard drive?

I have T610 image, I successfully saved/cloned from a jammed head HDD.
I am looking for T790 image, if any one can help highly appreciate!

Thanks,
L

[Lasek]

Re: Anyone successfully clone a Designjet hard drive?

Hi
Has anyone managed to get a working image of the HP DesignJet T770 HDD?

[vinigrande]

Re: Anyone successfully clone a Designjet hard drive?

Hi Kiran,

I have also been searching for that disk image. Could you please PM me that info too?

-Mike

clear





auto_awesomeDesculpe ressuscitar




















160 / 5.000






Sorry to revive the topic, but I need an image of the HD of an HP Designjet T2300, could anyone make this image available or indicate where I can find it?

[burritovampire]

Re: Anyone successfully clone a Designjet hard drive?

Sure will do, i have not tested it yet i didn't plug the machine in.

The machine is now put away in stock -
the hdd copy is done on acronis true image.

for other machines i think they need a certain boot partition then have the firmware on the usb to do a firmware update or see if the eeprom reset can be done.

Any chance I would be able to get a copy of that image? I recently bought a Z5600 from a recycler but of course they pulled the drive for data security. I have a ton of hard drives but I need the special HP Blessings to give it life again it seems.

[razvy79rzv]

Re: Anyone successfully clone a Designjet hard drive?

I have T610 image, I successfully saved/cloned from a jammed head HDD.
I am looking for T790 image, if any one can help highly appreciate!

Thanks,
L

Hi there! I have a working T790, but how to make an image from HDD?...the HDD is password protected. , when I plug the HDD in PC it asks for the password and I don't know it...
Any hints?