I have an HP LaserJet 4200n which is consistently getting an Error 13.01.00 "PAPER FEED 1, PAPER LATE JAM" If I print more than a few pages. With 3 kids doing school from home now, I print about 200 pages every Monday morning.
I just replaced all the rollers and separation pads hoping that would resolve the issue, but it did not. When it jams, the paper basically stops moving directly under the toner and just past the feed roller but right before the rubber loop with the ribs on it. Just for grins, I tried doing a 76 page print job from the manual feed Tray 1 and it printed all pages fine with no jams. (It was a lot quieter too)
Any suggestions as to where to go from here would be appreciated. I've seen posts suggesting an issue with the solenoids or the felt surface of one becoming worn, but wouldn't that cause the same issue regardless of being printed from Tray 1 or Tray 2?
Thanks in advance for any assistance
I just replaced all the rollers and separation pads hoping that would resolve the issue, but it did not. When it jams, the paper basically stops moving directly under the toner and just past the feed roller but right before the rubber loop with the ribs on it. Just for grins, I tried doing a 76 page print job from the manual feed Tray 1 and it printed all pages fine with no jams. (It was a lot quieter too)
Any suggestions as to where to go from here would be appreciated. I've seen posts suggesting an issue with the solenoids or the felt surface of one becoming worn, but wouldn't that cause the same issue regardless of being printed from Tray 1 or Tray 2?
Thanks in advance for any assistance
Comment