MFP M630, ADF issues...

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Oystercopy
    Senior Tech

    Site Contributor
    500+ Posts
    • Oct 2009
    • 579
    #1

    MFP M630, ADF issues...

    Hey guys... I went to put in a Feed Kit in this ADF today, and the machine is still struggling to feed paper. The customer is running a BOATLOAD of documents through that ADF (probably more than it can handle) and it starts to slow down and jam towards the end of the run. I would estimate she's putting 100 or so pages in there, and I'm not sure it can handle it. But I'd like to know, has anyone else had issues with the drive or clutches on this thing, and what can be done to fix it?

    Thanks in advance!
    OC
    Tags: adf, feed, issues, putting
    • Murv
      Sr. Escalations Analyst

      100+ Posts
      • Mar 2021
      • 180
      #2
      Re: MFP M630, ADF issues...

      Originally posted by Oystercopy
      Hey guys... I went to put in a Feed Kit in this ADF today, and the machine is still struggling to feed paper. The customer is running a BOATLOAD of documents through that ADF (probably more than it can handle) and it starts to slow down and jam towards the end of the run. I would estimate she's putting 100 or so pages in there, and I'm not sure it can handle it. But I'd like to know, has anyone else had issues with the drive or clutches on this thing, and what can be done to fix it?

      Thanks in advance!
      OC
      ADF on that unit is rated for 100 pages. That said, I have seen several strip out the gear on the shaft that drives the ADF kit. No parts spared, have to replace the whole ADF.

        Comment

        Previous template Next
        Working...