HP Laserjet 3 PCL5

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tcypy1961
    Senior Tech

    500+ Posts
    • Feb 2009
    • 773

    #1

    HP Laserjet 3 PCL5

    Customer says after installing printer cartridge the printer says to install printer cartridge. After removing and reinstalling sometimes several times the printer recognizes the toner cartridge. Is this a problem with the cartridge or a dirty sensor(switch) in the printer. If it's the printer where would I find the culprit.
    Thanks!
  • prntrfxr
    Service Manager

    1,000+ Posts
    • Apr 2008
    • 1622

    #2
    HP Laserjet 3 PCL5

    1) cartridge contacts
    2) printer contacts (that make contact with cartridge contacts)
    3) HVPS
    Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".

    Comment

    • tcypy1961
      Senior Tech

      500+ Posts
      • Feb 2009
      • 773

      #3
      HP LaserJet 3 PCL 5

      Is this a common problem with the rebuilt cartridges?

      Comment

      • schooltech
        School District Tech

        500+ Posts
        • Jun 2008
        • 504

        #4
        Normally, the reman cartridges work fine, especially when there are no chips involved.

        This is a cartridge that does not use a chip, as the HP 1300 is the first cartridge that uses a chip.

        Check the contacts and make sure that they are really clean and are properly contacting the cartridge.

        As the cartridges become newer, especially with color, they can be a real pain to reset, static affecting the chips, funky contacts, tiny pieces not having proper continuity, etc.

        One of my gigs is rebuilding cartridges, so this is something that is in my backyard, so to speak.
        Bachelor of Science in Information Technology, Comptia A+, Comptia Network+

        Comment

        Working...