97 results in 0.0278 seconds.
-
c3350i
hello group, I have this problem in km c3350i, someone help me, I changen the transfer belt unit, hvps, all adjustment, and still the error ... -
Lexmark XM3350
New out of box Lexmark XM3350 is DOA. Any simple fixes? Maybe a fuse on the PS? Unfamiliar with this model. Most of my Lexmark experience is on the... -
Sharp MX-M465 Overtone
Hey guys Is there some sort of manual toner concentration adjustment that I haven't seen on B&W Sharps?
I have a MX-M465 that... -
HP laser MFP E87740 with black print/copy
Hi
i have HP laser MFP E87740 , print and copy solid Black when i use normal text
and print virtical color lines when i print or copy color... -
Xerox Apeos IV 3065 error code 041-324
first i have change mcu board( put back eprom) , on machine still 041-324 , step 2 , try change HVPS , still same 041-324 , need help any suggestion ,... -
Konica 951 dev come with copy
Hi guys, I need yours help. PRO 951. Copy out with little bit developer on the copy. And after 100 copies lot of developer inside of machine. I change... -
altalink c8045 too much yellow
I have a c8045 with too much yellow saturation so far I replaced yellow dv assy , swapped out drums and updated firmware . I performed a copier/system... -
Versant 80 impulse band
Does anybody know if Xerox have come up with a fix for the impulse band issue yet? (the single band particularly in black; not the TAG13 banding).... -
Samsung SCX-5530 "door Open"
I have the manual
Display stay on "warming up please wait" and flashing once in a wile "open door"
Turning... -
what causes dark background on copies, but scans and prints look fine?
I am working on a Workcentre 3635mfp and sometimes the configuration report that prints after power on will be all dark, but usually a test print such... -
Error LL-22 on Xerox 8825 - low volts on TFR I and DET I.
We just replaced the HVPS on our 8825 because we were getting LL-22 and low volts on the TFR and DET leads. Now I am still getting 0.09 VDC on TFR I (spec... -
oce tds400 plotter - blank where print should be
Hi all,
long shot here but just hoping someone can help out..
Have a Tds 400 that has a severe dev dropping issue. dev etc... -
maurimx started a topic looking for parts 1005K20971 Charge Preclean HVPS 960k18011 MCV PWB assemblyin Xeroxlooking for parts 1005K20971 Charge Preclean HVPS 960k18011 MCV PWB assembly
Does any one know where I could get this parts ??
1005K20971
Charge Preclean HVPS
960k18011
MCV PWB assembly... -
Xerox 3030 stuck at " adjusting copy quality"
The unit is stuck with this in the screen " adjusting copy quality". The customer says he added a new toner tube, and emptied the waste container.... -
eStudio 850 Smudge
We have an eStudio 850 at a client that is making poor copy/print quality. Longer it runs, worse it gets. We put in new DV, new drum, drum brush, etc....
